-3AN Brake & Clutch Line; PTFE Inner Liner with Black Vinyl Coated 308 Stainless Steel Braided Outer Cover, Sold by the Foot

Your Price: $3.49

Part Number: GB0725B-03

Availability: In Stock.

Quantity

Description

-3 AN brake and clutch line with high pressure PTFE (Polytetrafluoroethylene) inner liner and 308 stainless steel outer braid that is coated in black vinyl to provide further protection from corrosion. This line is ready for the most demanding motorsports applications.

Sold by the foot. Quantity in cart will equal the number of feet.
308 Stainless steel braided with a black vinyl (PVC) outer cover for excellent abrasion resistance...more than just our standard stainless braided 3AN line (3AN-SS-BRK)
Recommended for brake, clutch & transmission, power steering, oiling, hydraulic, and vacuum lines.
Compatible with a wide range of fuels, oils, and most acids and solvents:
- All grades of gasoline including E85 and 110LL, av-gas, alcohol, nitro, methanol, ethanol, isopropyl alcohol, and many more.
- All street and racing glycol-based (DOT 3, DOT 4, DOT 5.1) and silicone-based (DOT 5) brake and clutch fluids.
Minimum temperature -94°F/ -70?/ Maximum temperature 482°F/ 250?.
Equivalent tubing O.D.: 3/16" or 0.1875".
I.D.: 9/64", 0.138", or 3.65mm.
O.D.: 1/4", 0.25", or 6.35mm.
AN Fitting Thread Size: 3/8"-24.
Minimum bend radius: 1.5".
Rated to 4000 PSI with a burst pressure of 12000psi.
- *Pressure ratings are for hoses properly assembled per instructions using compatible hose end fittings.
Typically used in FF and F2000 cars for both brake and clutch lines. NOTE: Though just a few tenths of a mm thick, the additional thickness of the vinyl coating may prevent this line from being able to be inserted in some suspension wishbones where the brake lines are run internally without small modification of the I.D. of the wishbone holes. A small dremel tool bit should be able to widen wishbone brake line holes easily enough to allow this line to work.
This line is common for oil pressure gauge lines too.
Recommended for drivers looking for the firmest pedal feel.
Part # GB0725B-03

Fittings, Brake, SAE 37 Deg Male to Metric Flare -3 AN to 10mm x 1.25, Steel, Pr

$26.97

In Stock.

Buy

Fitting, Hose End, Speed-Seal, Straight, -3 AN Hose, 10mm Banjo, Steel, Zinc Plated

$10.95

In Stock.

Buy

-3 AN Brake & Clutch Line; PTFE Inner Liner with 308 Stainless Steel Braided Outer Cover, Sold by the Foot

$3.37

In Stock.

Buy

Brass Sleeve for -3 AN Hose Ends (Brass Olive or Ferrule)

$0.99

In Stock.

Buy

3AN Tee with 1/8 NPT Female Branch, Steel

$15.49

In Stock.

Buy

Male 10 x 1.25mm Metric Concave Seat to 3AN Male, Stainless

$10.99

In Stock.

Buy

Male 12 x 1.0mm Metric Convex Seat to 3AN Male, Steel

$8.19

In Stock.

Buy

Male 12 x 1.5mm Metric Concave Seat to 3AN Male, Stainless

$26.69

In Stock.

Buy

STAY UP TO SPEED

-3AN Brake & Clutch Line; PTFE Inner Liner with Black Vinyl Coated 308 Stainless Steel Braided Outer Cover, Sold by the Foot

Related Items

STAY UP TO SPEED

Newsletter

-3AN Brake & Clutch Line; PTFE Inner Liner with Black Vinyl Coated 308 Stainless Steel Braided Outer Cover, Sold by the Foot

Related Items

STAY UP TO SPEED

Newsletter

Follow Up