VD78-80 Bolts
(inboard pick-ups only)
Front upper
wishbones: 2 off 3/8 UNF x 6” hex
2
off 3/8 UNF x 1 ¾” hex
Front lower
wishbones: 2 off 7/16 UNF x 1 ¾” hex
2
off 7/16 UNF x 2 ½” hex
Front trackrod
to rack clevis: 2 off 3/8 UNF x 1 ¼” hex
Rear lower
wishbones: 2 off 7/16 UNF x 2 ½” hex
Rear upper
radius rods: 2 off 3/8 UNF x 2 ½” hex
Rear lower
radius rods: 2 off 7/16 UNF x 3” hex
Rear damper top
mounting: 2 off 3/8 UNF x 1 1/2” hex
Rear roll-bar
block mounting: 2 off 3/8 UNF x 3” hex
Others:
Front rollbar
links: 2 off
5/16 UNF x 2 ¼” hex
2
off 5/16 UNF x 1” hex
Front damper to
lower wishbone: 2 off 3/8 UNF x 1 ¾” hex
Master cylinder
mtg: 6 off 5/16 UNF
x 2 ¼” hex
Rear radius rods
outboard mtg: 4 off 3/8 UNF x 1 ½” hex
Rear damper to
lower wishbone: 2 off 3/8 UNF x 1 ½” hex
Lower wishbone
to upright rear: 2 off 7/16 UNF x 3 ½” hex
Gearbox to rear
beam: 2 off 3/8 UNF x 5
½” hex
Joints and
Bearings (RH thread unless indicated otherwise):
Front lower wishbone:
2 off ½” thread x 7/16” bore
1
off RS10 spherical
Front upper
wishbone: 2 off 7/16 x 3/8
1
off Thompson joint (or conversion to 5/8 x ½)
Trackrod: 1 off 7/16 x 3/8
1
off 7/16 LH x 3/8
Rear lower
wishbone: 1 off 5/8 x ½
1
off ABT8 spherical
1
off ½ x 7/16 (drilled and tapped for roll bar link)
Upper radius
rod: 1 off 7/16 x 3/8
1
off 7/16 LH x 3/8
Lower radius
rod: 1 off 7/16 x 7/16
1
off 7/16 LH x 3/8
Rear top link: 1 off 7/16 x 3/8
1
off 7/16 LH x 3/8
Front roll-bar
links: 2 off 5/16 x 5/16
Rear roll-bar
links: 2 off 5/16 x 5/16
