This 6-point 2x2 harness from Sabelt is specifically designed for GT and Endurance racing where the driver is wearing a HANS Device. This comprehensive harness includes both pull-up and pull-down lap belts to suit just about any installation. The anti-sub straps are permanently sewn to the camlock buckle.
The Sabelt Silver Series harnesses are built for light weight, with professional-level aluminum adjusters on the shoulder belts. The 2" lap belt has special lightweight snap-in carabiners sewn in. The pull-down lap belt features adjusters incorporated into the buckle tabs. The 2" shoulder belts and 2" sub straps are equipped with 3-bar sliders for wrap-around mounting, and the sub straps also include snap-in end plates. The shoulder belts have small loops alongside the Sabelt logo patch for routing radio wiring or drink tubes, and a Velcro patch near the buckle tabs keeps the belts out of your way in the pits. The lap belt and shoulder belts are also equipped with high-visibility yellow loops on the loose ends for quick tightening after a driver change. Unlike many other brands, the sub straps are sewn directly to the buckle, not to an additional tab which is connected to the buckle. FIA 8853-2016 homologated. Available in Black or Red.
Strap lengths (all lengths are maximum length adjustment unless noted):
Shoulder strap, mount to adjuster: 1700mm (66.9")
Shoulder strap, adjuster to buckle: 360mm (14.2")
Lap belt (pull-down), mount to buckle: 720mm (28.3")
Lap belt (pull-up), mount to adjuster: 120mm (4.7") fixed; adjuster to buckle: 560mm (22")
Anti-sub straps: 390mm (